- 1. Dual use :
- 1). This case support to install 3.5 inch touchscreen , and need to remove the cover board and fan in this using way. ( You can not install the 3.5 inch screen and fan at the same time )
- 2). When you don't use the 3.5 inch touchscreen , it is a general case with cooling fan.
- 2. Full access for Raspberry Pi :
- We leave every hole for SD card , HDMI , AV , Ethernet , USB , POE , Camera , MIPI DSI ports.
- 3. Support cooling fan :
- You can install the cooling fan on the cover board , which make the best heat dissipation and extend the using life of Raspberry Pi. ( You can not install the 3.5 inch screen and fan at the same time )
- 4. Hang hole on the bottom:
- We make 2 hole on the bottom so that you can hange the case on the wall or something else . This design is very convenient when using the 3.5 inch touchscreen.
- About the pad – use to support the screen
- 1). Install the Raspberry Pi on the base board
- 2). Please stick the pad on the back of 3.5 inch touchscreen ( as the picture show ) , then insert the 3.5 inch touchscreen on Raspberry Pi by GPIO pin correctly ( don't be malposed )
- 3). Install the cover board
- This touchscreen need the driver , and we provide the system image (Raspbian) by following link:
- If you want to use your own system,you need to solve the problem of driver yourself,thanks.
- 1. for Raspberry Pi 3 :
- 2. for Raspberry Pi 3 Modle B+ :
- or refer to configure it by this link :
- The configure method for Raspbian system:
- This LCD Module need install driver first.
- Step 1：Download the Raspbian IMG
- Step 2: Burn the system image
- If you don't know how to do that,you can refer to the Raspberry Pi office tutorial
- Step 3: Open terminal(SSH) and install the driver on RaspberryPi
- (tested on RaspberryPi 3B+,3B,2B,2B+,1B,ZERO)
- sudo rm -rf LCD-show
- git clone https://github.com/goodtft/LCD-show.git
- chmod -R 755 LCD-show
- cd LCD-show/
- sudo ./LCD35-show
- Wait A Few Minutes, when the system reboot ok, you can see that.
- 1 x 3.5 inch Touchscreen ( not include Raspberry Pi )
- 1 x ABS Case
1. Dual use : 1). This case support to install 3.5 inch touchscreen , and need to remove the cover board and fan in this using way. ( You can not install the 3.5 inch screen and fan at the same time ) 2). When you don't use the 3.5 inch touchscreen , it is